So here is another basic electronics project I completed, it's based on a kit (the Geekcreit® DIY C51 Touch Control Keys Full Color LED Aurora Tower Kit from Banggood).
In this 3-part (4 if you count the Display-Modes demo video) series I solder up this kit, including many SMD components and a bunch of 10mm RGB LEDs.
I also model up a case for the kit in Fusion360, then 3d-print a prototype (and then correct a couple of flaws and print out a 2nd version)
In this episode we "unbox" the kit and take a look at the contents, then start soldering the SMD passive components.
[youtube]https://www.youtube.com/watch?v=rr28XwycCg8[/youtube]
In this episode we finish soldering the SMD parts, and then solder in all the RGB LEDs, including showing how to deal with the inevitable solder-bridges!!
[youtube]https://www.youtube.com/watch?v=s_xhBeEJqC4[/youtube]
In this episode after soldering in the last RGB LED we power it up and find 3 LEDs don't seem to be completely working, so some investigation is needed and some solder joints re-worked before finding the cause of the issue. Then the prototype case is trialed, and then a modified case is printed and fitted.
[youtube]https://www.youtube.com/watch?v=AzGoQz6TS1g[/youtube]
Then finally this is just a video of the various display modes of this Kit.
[youtube]https://www.youtube.com/watch?v=n_Q-Ky0C-yk[/youtube]
Thanks for watching,
Tim
