Plasma cutter!

[kayzed1]

Hi all, just asking about Plasma cutters as the lad and i are thinking of getting one BUT::: so many on the market from £300 to the moon..
only needs to cut 12mm Max and that will be once in a blue moon..any help from users.
Lyn.

[John Rudd]

Doubleboost is a bit of a wiz with welding and cutting gear...
Have a look at his Youtube channel, where there's a demo he did on a plasma cutter....Quite entertaining...too

[kayzed1]

thanks john i had forgotten about the Vids.

[micktoon]

Hi Lyn, check out Doubleboosts review of the plasma cutter, I know he is very happy with it and it slices through 12mm neatly with ease, I think it goes up to 20mm.John goes through it all in his video.
  Cheers Mick

[kayzed1]

just been on the phone to R-Tech welding, ordered a P50HF  plus bits.

[mfletch]

Nice one you wont regret it they save loads of time 

[doubleboost]

I like mine
You must use "dry" air
Make sure the earth is good
USE A PROPPER FACE SHIELD
John

     [youtube]TU4sbJBmN4E[/youtube]

     [youtube]HTD0SX3SYJw[/youtube]

[kayzed1]

I like mine
You must use "dry" air
Make sure the earth is good
USE A PROPPER FACE SHIELD
John
https://www.youtube.com/watch?v=TU4sbJBmN4E&list=PLwzZw6FLeTREap-IHFtVuIvcA_QHGwm8u

https://www.youtube.com/watch?v=HTD0SX3SYJw

Have got and use all of the above John, thanks for the reminder thou.
Got mine a bit cheaper as said shop soiled Re: paint damage....well the lad Paints cars
among other things and we can not find a mark on it...and it works very well, i saved an
old desiccator from the scrap before i retired thinking it would come in handy one day.
Stripped, cleaned, tested and put back together and now just awaiting a bracket to
fit to the trolley.
Lyn.