MadModder

The Shop => Tools => Topic started by: wayne47 on June 18, 2014, 07:44:38 PM

Title: Boxford aud
Post by: wayne47 on June 18, 2014, 07:44:38 PM

Hi anybody know where I can get half nuts for boxford aud ?

Title: Re: Boxford aud
Post by: JD on June 19, 2014, 02:32:50 AM

wayne47
I have a Boxford CUD and here in UK I use www.g&mtools.co.uk  on 44 (0) 1903 892510 or sales@gandmtools.co.uk
or Tony Griffiths www.lathes.co.uk  tony@lathes.co.uk 44-1298-871633) this last one is a large library of info of most lathes, Mills, Drills etc made world wide.

John

Title: Re: Boxford aud
Post by: chipenter on June 19, 2014, 03:06:36 AM

Another source http://www.latheparts.co.uk/ half nuts are £45 .

Title: Re: Boxford aud
Post by: wayne47 on June 19, 2014, 05:07:34 PM

Thank you for reply am trying both places
Wayne

Title: Re: Boxford aud
Post by: Marcus on September 07, 2014, 11:22:37 AM

Wayne,

You can still buy new spares from Boxford. They no longer make the manual lathes, but they have a stock of spares. Quite expensive, but handy for the odd part, and very helpful too.
I have an AUD MkIII and have recently bought spare thrust races for the cross-slide feedscrew. I have occasionally bought spares from other suppliers, but they don't seem to last as long.

www.boxford.co.uk

Marcus