MadModder

The Shop => Tools => Topic started by: Keithhs on May 14, 2014, 12:49:43 AM

Title: mini ball turner
Post by: Keithhs on May 14, 2014, 12:49:43 AM

Nothing very unique about this ball turner other than perhaps the size...It clamps to the compound slide (tool slide). The two items to the left in the picture of a couple of balls that I turned are used as an aid to setting the cutter. In the same picture the larger ball is .178dia. and the small one is .122  inches. I think the pictures are pretty self explanatory...

Title: Re: mini ball turner
Post by: Stilldrillin on May 14, 2014, 01:37:48 AM

Nicely/ neatly done Keith!   :clap: :clap:

That's the first, "light duty" turner I've seen........    :thumbup:

David D

Title: Re: mini ball turner
Post by: Arbalist on May 14, 2014, 04:03:13 AM

Dinky!

Title: Re: mini ball turner
Post by: tel on May 14, 2014, 06:23:36 PM

nice piece Keith - so ..... tiny hand rails around everything now?