MadModder

Gallery, Projects and General => How do I?? => Topic started by: damien on November 30, 2013, 05:13:24 AM

Title: maximit v10-p lathe
Post by: damien on November 30, 2013, 05:13:24 AM
Hello my name is Damien.  I have bought a maximit v10-p lathe and I'm having a problem with the gears on it.  It wont stay into 2nd and 4th speed and was just wondering does anyone know anything about this problem.  I have also took apart the 3 jaw chuck and clean it and put it back together and it is sticking when I screw the chuck in so far. Thank you.
Title: Re: maximit v10-p lathe
Post by: Jasonb on November 30, 2013, 01:58:23 PM
The Emco user group would be a good place to ask

http://groups.yahoo.com/neo/groups/emcoV10lathe/info
Title: Re: maximit v10-p lathe
Post by: damien on November 30, 2013, 04:29:10 PM
thank you
Title: Re: maximit v10-p lathe
Post by: BenH on December 01, 2013, 01:33:24 PM
I would 2nd that! The Emco user group is very handy, I have a non P V10 myself :)

I'd take the top cover plate off on the gearbox and make sure the gears and selectors are ok, they do get damaged quite easy with heavy handed use..