MadModder

Gallery, Projects and General => Project Logs => Topic started by: ebaker on September 12, 2013, 11:24:29 PM

Title: Tiny Power Steam Engine
Post by: ebaker on September 12, 2013, 11:24:29 PM

Started my first project using castings I bought from Tiny Power. Its a 3X4 double acting single cylinder steam engine. I bought just the basic cylinder castings they offer not the entire casting kit. I plan to modify the engine from the basic configuration.

Title: Re: Tiny Power Steam Engine
Post by: AussieJimG on September 15, 2013, 01:04:39 AM

Should be a good project with a few photos to come.

Jim

Title: Re: Tiny Power Steam Engine
Post by: ebaker on September 24, 2013, 11:23:17 AM

Will do photos as soon as I work out how to do it. Put some on photo bucket but all I get is a small box with a small red x in it when I try to post.

Title: Re: Tiny Power Steam Engine
Post by: Brass_Machine on September 24, 2013, 11:34:23 AM

Go ahead and try to post. Even with the red X... I can then see what you are doing and try to help.

Thanks
Eric