MadModder

Home Base => Introductions => Topic started by: ebaker on August 12, 2013, 10:23:53 PM

Title: New member from Michigan
Post by: ebaker on August 12, 2013, 10:23:53 PM

Hi, Just getting started in metal casting. Have built a waste oil burner.  Burns about 1.5 gal/hr. Flame hot enough to melt steel wire. Still working on furnace. Would like to work into casting iron to make steam engines. Have a craftsman 12" lathe and bridgeport type knee mill.

Title: Re: New member from Michigan
Post by: vtsteam on August 12, 2013, 10:35:59 PM

Welcome ebaker! Similar interests here.  :wave:
 :beer:

Title: Re: New member from Michigan
Post by: ebaker on August 12, 2013, 11:02:37 PM

Thanks vtsteam. I've been following your work with great interest.

Title: Re: New member from Michigan
Post by: dsquire on August 12, 2013, 11:12:28 PM

Ebaker

Hi ebaker and welcome to MadModder. I am sure that you will find many here with similar interests to yours. If you have any questions just ask as there is always someone around to answer or at least comment. We look forward to your future participation in the various threads.  :D :D

Cheers  :beer:

Don

Title: Re: New member from Michigan
Post by: krv3000 on August 14, 2013, 06:51:05 PM

hi and welcume

Title: Re: New member from Michigan
Post by: spuddevans on August 17, 2013, 03:44:08 AM

Hi from me too  :wave: Glad to have you with us.

Tim

Title: Re: New member from Michigan
Post by: micktoon on August 17, 2013, 04:26:50 AM

Hi ebaker , welcome to the forum  :wave: sounds like you have been busy already, looking forward to seeing your casting adventures.

  Cheers Mick

Title: Re: New member from Michigan
Post by: Fredbare on August 17, 2013, 04:23:21 PM

Welcome aboard ebaker, join in the fun.

John

Title: Re: New member from Michigan
Post by: Meldonmech on August 24, 2013, 09:31:37 AM

Hi ebaker
                       Welcome to the forum, have you done any casting?

                                                                                      Cheers  David