MadModder

The Shop => Tools => Topic started by: Meldonmech on May 10, 2013, 09:40:33 AM

Title: Tap and Drill Stand
Post by: Meldonmech on May 10, 2013, 09:40:33 AM
Hi Guys,
             This a beginners weekend project, and requires a small lathe and a drilling machine. It is the first project I made in my own workshop, which consisted of a bench, vice, home made lathe, and a light drilling machine. I normally spent ages looking for taps and tapping drills in my overfull toolbox. I saw this stand idea in a magazine, possibly M.E., and since have made similar stands for all my taps/drills. I have found them extremely useful and time saving.
Title: Re: Tap and Drill Stand
Post by: modeldozer on May 10, 2013, 09:52:01 AM
Hi,

Very nice.  :thumbup: :clap:
The to do list just got longer again.

Cheers  :beer:
Abraham
Title: Re: Tap and Drill Stand
Post by: micktoon on May 10, 2013, 04:56:08 PM
Nice Job David  :thumbup: , a handy little project and very useful too ......another thing or three on the to do list  :palm:



Cheers Mick.
Title: Re: Tap and Drill Stand
Post by: krv3000 on May 11, 2013, 05:20:47 PM
nice job  :thumbup: