MadModder

The Shop => Tools => Topic started by: doubleboost on April 23, 2013, 07:12:17 PM

Title: More Video
Post by: doubleboost on April 23, 2013, 07:12:17 PM

John

Title: Re: More Video
Post by: vtsteam on April 23, 2013, 08:13:11 PM

Another helpful video, doubleboost. I don't have a 626, but an Enco Chinese mill drill that I also bought used. Many similarities, though without the knee and tilt head, so I can do some of the mods you show. Thanks for your videos!  :thumbup: