MadModder
Home Base => Introductions => Topic started by: HappyBill on February 15, 2013, 11:34:10 PM
-
Hello,
Amazing set of smiley faces - well done somebody
Retired Aussie with a shed and a Triton
Just built a drum sander and currently building a small lathe as per shopnotes maganzine
Wondering if I have the oomph to build a Gingery Lathe next. Seems a bit daunting but slowly slowly step by step.
Found this forum after seeing references in other forums
Many Gingery folk out there ?
Bill
-
Hi Bill :wave:
Welcome to the collective :borg:
One of our new members (VTsteam) did an amazing job on a Gingery. He has a thread about it HERE (http://madmodder.net/index.php/topic,8191.0.html). I have seen plans for a concrete lathe out there as well. (found IT (http://makeprojects.com/Project/The+Multimachine+$150,+12-Inch+Swing,+Metal+Lathe-Mill-Drill/1751/1)
Now when you say Triton... are we talking Triumph powered Norton?
Eric
-
Hi Bill, welcome to the forum! :thumbup:
-
hi and welcome
-
Hi and welcome to us :wave:
-
Hi Bill, welcome.
Jim
-
Hi Happy Bill, Welcome.
Brass: If as I suspect Happy Bill is from Victoria Australia (Suggested by the term 'G'Day') Then the Triton he refers to would be a wood working invention made here in OZ that allows you to use your power circular wood saw as a table or cross cut saw. It also had adaptions for routers. Sadly Triton are now out of business as far as I know. I had the Mk3 Triton.
Swarfnstuff.