MadModder

Home Base => Introductions => Topic started by: canadianhorsepower on January 03, 2013, 02:01:32 PM

Title: Introduction of me,myself andI and pictures
Post by: canadianhorsepower on January 03, 2013, 02:01:32 PM

Hi Guys I'm happy that I join this group. I'm a retired G.M  Grand master technicien and certified ASE master also
I have a complete shop with 2 lathe and 2 mill one being a CNC I also do electronic project from drawing to PCB board. I ride motorcycle on spare time Now I work as an Electro-Mecanical Engeneering Professor part time building robots and all. O I forgot I also play with RC truck. Did many engine project from chain saw to karting, race cars and 4x4 blown engine Here are a few pick of my Expense account (shop)

Title: Re: Introduction of me,myself andI and pictures
Post by: AussieJimG on January 03, 2013, 02:13:47 PM

I saw the photos of your shop on HMEM and was blown away by the organisation and the use of stainless steel. :drool:

 Now that I see your biog, I understand.

And I feel better about my messy playroom. :ddb:

Jim

Title: Re: Introduction of me,myself andI and pictures
Post by: saw on January 03, 2013, 04:06:42 PM

Feel very welcome to us  :wave:

Title: Re: Introduction of me,myself andI and pictures
Post by: dakengineermeister on January 03, 2013, 06:47:05 PM

It appears that we have a lot in common with robotics, circuit  design / layout, machining, etc, I hope to see some of your projects posted as well.
-Kenneth

Title: Re: Introduction of me,myself andI and pictures
Post by: krv3000 on January 03, 2013, 07:56:25 PM

hi and welcume