MadModder

Home Base => Introductions => Topic started by: luv2ride on January 02, 2013, 10:22:58 PM

Title: Here from Colorado Springs
Post by: luv2ride on January 02, 2013, 10:22:58 PM

Figured it was time to join since I am getting into more projects and the machining advice here is great.
I have an HF mini mill and 7x10 and also a Jet 9x20. For me they are for guns and bikes and whatever else comes up.

Title: Re: Here from Colorado Springs
Post by: Brass_Machine on January 02, 2013, 10:35:17 PM

Hiya!

Welcome to the collective :borg:

Used to be into bikes and guns. Well I still am, just don't have the time like I used to...

Eric

Title: Re: Here from Colorado Springs
Post by: saw on January 03, 2013, 02:38:26 AM

Hi and welcomme  :wave:

Title: Re: Here from Colorado Springs
Post by: ozzie46 on January 03, 2013, 09:02:16 AM

Welcome. I'm just down the road a piece. Pueblo.  Great bunch here.

  Ron

Title: Re: Here from Colorado Springs
Post by: dsquire on January 03, 2013, 01:18:03 PM

luv2ride

Welcome to MadModder. Looks like you have a great start to setting up a shop. The rest will come as time/needs/cash/space allow. If you have any questions just ask. There is always someone around to answer or at least give an opinion. We look forward to your future participation in the forums.

Cheers  :beer:

Don

 

Title: Re: Here from Colorado Springs
Post by: AussieJimG on January 03, 2013, 02:21:15 PM

Welcome from the other (currently warm) side of the world.

Jim

Title: Re: Here from Colorado Springs
Post by: krv3000 on January 03, 2013, 07:55:55 PM

hi and welcume

Title: Re: Here from Colorado Springs
Post by: Pete49 on January 03, 2013, 09:05:28 PM

Quote from: AussieJimG on January 03, 2013, 02:21:15 PM

Welcome from the other (currently warm) side of the world.
Jim

Verrrry warm at the moment  :wave:
Pete