MadModder
The Shop => Tools => Topic started by: Fergus OMore on November 29, 2012, 10:29:55 AM
-
I'm getting/got arthritis in my hands. Not grumbling but merely explaining!
I have a spare little Unimat clone, a couple of computer flat screens etc and wonder whether anyone has used a Raspberry Pi etc to drive the thing. The RP is because of its size in an already overcrowded workshop.
So has anyone any pointers which might help, please?
Norman
-
There's a long thread about it here:
http://www.cnczone.com/forums/linuxcnc_formerly_emc2/141327-nerds_only_raspberry_pi_emc2.html
-
Bill, my thanks were posted but disappeared.
Thank you again
Norman