MadModder

The Shop => Tools => Topic started by: nel2lar on November 04, 2012, 10:49:57 PM

Title: United States Manufacturing “MV”
Post by: nel2lar on November 04, 2012, 10:49:57 PM

Looking for someone that has a Model MV. I need some dimension on the pulleys. My machine had a 3 phase VFD and I did not have the controller or the the 3 phase line at home. I will be running 22oV single phase. Any help would be appreciated. Thanks again
Nelson Collar   

Title: Re: United States Manufacturing “MV”
Post by: nel2lar on November 06, 2012, 09:31:25 PM

Looking for someone that has a Mill Rite Model MV Horizontal Milling Machine. What I am looking for is dimension of the two pulleys. My machine had a single speed drive because the company that owned it had a air over hydraulic system and I wanted it for anything I put on it. If any one had all I need is the diameters of the pulleys.

Nelson Collar   

Title: Re: United States Manufacturing “MV”
Post by: AR1911 on November 30, 2012, 05:55:18 PM

Nelson, I think I promised you i would measure those pulleys, then lost your message, or forgot where you PM'd me perhaps..
If you will email me directly that would help.
My email is in my profile