MadModder

Gallery, Projects and General => Project Logs => Topic started by: Meldonmech on October 18, 2012, 03:33:45 AM

Title: Myford ML10 Travelling Steady ----Machining the casting
Post by: Meldonmech on October 18, 2012, 03:33:45 AM
Hi Guys

Now for the machining, there is a small area of  shrinkage on  one vertical face, so will make it a feature and  machine a  circular  depression to hide it. One my next casting I will make sure there is a big  head around  the pouring hole to compensate for shrinkage.

                                                                   David
Title: Re: Myford ML10 Travelling Steady ----Machining the casting
Post by: Rob.Wilson on October 18, 2012, 02:24:00 PM
Looks a good sound casting David ,,,,,,,,,,there will be no stopping you now  :thumbup:


Rob
Title: Re: Myford ML10 Travelling Steady ----Machining the casting
Post by: doubleboost on October 18, 2012, 04:12:11 PM
Nothing wrong with that casting :thumbup: :thumbup:
Machined up nice :clap: :clap: :clap:
John
Title: Re: Myford ML10 Travelling Steady ----Machining the casting
Post by: Blue Chips on October 19, 2012, 11:20:45 AM
Looks real good, did you use any particular type of aluminum for the casting or just what was around?
Title: Re: Myford ML10 Travelling Steady ----Machining the casting
Post by: Meldonmech on October 22, 2012, 11:11:55 AM
Hi Guys
               Thanks for the comments. Blue chip I use scrap aluminium, but have found that to achieve a good machined finish I need to use a mix of soft aluminium eg pots and pans, and die cast items, about 50/50.  The zinc and silicon in the castings greatly improves the machinability. I cast the alloy into small ingots before making my own casting.
                                             David