MadModder

Gallery, Projects and General => Gallery => Topic started by: Pete49 on August 28, 2012, 08:52:46 AM

Title: another tool for the box
Post by: Pete49 on August 28, 2012, 08:52:46 AM

Today I was doing some work and needed to drill a piece of round rod and thought I should make it easier so decided to make a v-block and clamp. Took most of the day but hey its another tool for the box  . I used a small piece of cast iron I had and heres the result. crappy pic (phone) but works like a charm. Just need to get a shorter bolt.
Pete

Title: Re: another tool for the box
Post by: wd on August 29, 2012, 07:35:50 PM

Hi Pete

Would luv to see your images but they're only 96 pixels.Usually 640x480 or 800x600 is ideal.Perhaps resize

Title: Re: another tool for the box
Post by: Pete49 on August 29, 2012, 10:59:28 PM

yeh good idea I'll use the camera this time

Pete

Title: Re: another tool for the box
Post by: Pete49 on August 31, 2012, 12:33:00 AM

OK heres a better pic of the v block  :ddb: The little blow holes will be filled with JB weld.............once I find it :doh:
Pete