MadModder
Gallery, Projects and General => Neat Stuff => Topic started by: ironman on July 17, 2012, 12:31:46 AM
-
Here are two videos I made of a friends furnaces and casting methods.....
(Hope this is ok, Ironman..... David).
-
Any more info on the homemade induction furnace?
[Could you embed your Youtube links in your posts rather than putting in a link to them? ]
-
I did not build the induction furnace so I do not have any infomation on it. If you take the cover of a computor power supply it works in the same way as the induction furnace works, they can be very complex. I had a go at embedding the videos but It did not work. I'm not very good with computors so I will stick with what I know that works
-
I did not build the induction furnace so I do not have any infomation on it. If you take the cover of a computor power supply it works in the same way as the induction furnace works, they can be very complex. I had a go at embedding the videos but It did not work. I'm not very good with computors so I will stick with what I know that works
Ironman,
Don't worry about embedding........ Do yer best, until you get it! :med:
One of the Mods will tidy up, if necessary. :thumbup:
David D
-
What is the cost of using an induction furnace like this to melt iron or steel? I would like to be able to cast my own parts and this seems the way to go.
-
What was he casting in the 2nd vid - some kind of ornamental seat?
-
Would guess it was a tractor seat.