MadModder
Gallery, Projects and General => Gallery => Topic started by: marfaguy on March 13, 2012, 11:06:56 PM
-
Lex at swarfrat.com asked me if I'd like to beta build his upcoming Radial Oscillating Cylinder engine. After long careful contemplation lasting about
5-10 seconds I said ... well duh! This was a challenging build for a newbie like me but I would think a more experienced machinist/builder would also have fun with it.
Anyway here's a video of my build.
I'd appreciate any comments or feedback.
-
Nice running engine. Watching the rods on the crank is pretty mesmerizing. Yeah, it does have a nice sound too.
How did you get to be a beta builder for Lex?
Eric
-
Nice running engine. Watching the rods on the crank is pretty mesmerizing. Yeah, it does have a nice sound too.
How did you get to be a beta builder for Lex?
Eric
I had emailed him some questions while I was building the VATOC
http://madmodder.net/index.php?topic=6618.0
and the Mill Spindle centering scope.
http://swarfrat.com/MillSpindleCenteringScope.htm
Later I sent him a link to the VATOC. He liked it and decided I'd be a good beta tester I guess.
Nice guy. Very helpful with questions.