MadModder
The Shop => Tools => Topic started by: myfordguy on January 07, 2012, 04:55:16 PM
-
Hi guys,
I would like to purchase a second hand Clarkson autolock mill chuck MT2 with sleeve to MT3.
Please give some feedback regarding quality compared to HBM or similar Chinees things.
Is it worth buying?
Does anyone know what thread the backside has that takes the draw bar?
Thank you,
Marc
-
Marc,
Any Clarkson toolholder is far, far better than any offering from HBM or any other Chinese / Indian gear. Clarkson are a recognized production make, and as such are far superior to any home shop gear in every respect. So stick with the Clarkson [as long as it has not been severely abused].
Regards,
Udimet.