MadModder

The Shop => Tools => Topic started by: pipemakermike on December 22, 2011, 11:45:45 AM

Title: is there a Grizzly equiv for the Cub630 OR Warco GH750
Post by: pipemakermike on December 22, 2011, 11:45:45 AM

I want to fit C5 collets to my Chester Cub630 and the only fittings I can find on the web are from Grizzly but I would need to know which model is close to my Cub.

Regards
Mike

Title: Re: is there a Grizzly equiv for the Cub630 OR Warco GH750
Post by: Rob.Wilson on December 22, 2011, 03:01:58 PM

Hi Mike

What about this one from Warco   http://www.warco.co.uk/lathe-collet-chucks/259-5c-precision-collet-chuck.html   you would have to make/get  a backplate to match you lathe spindle nose  :dremel:


Rob

Backplates   http://rotagriponline.com/index.php?option=com_virtuemart&page=shop.browse&category_id=601&Itemid=29

Title: Re: is there a Grizzly equiv for the Cub630 OR Warco GH750
Post by: pipemakermike on December 22, 2011, 03:31:29 PM

Hi Rob

Yes I have that root in hand - I have all the parts - but I would still like a more traditional system

Title: Re: is there a Grizzly equiv for the Cub630 OR Warco GH750
Post by: Rob.Wilson on December 22, 2011, 03:36:26 PM

Hi Mike


By more traditional do you mean draw bar closing ?


Oh ,, Welcome to the forum  :wave:

Rob

PS ,, nice pipes ,,,,,,,,,,, the lad a few doors up gets his out on New Year  :headbang: