MadModder

The Shop => Tools => Topic started by: dickda1 on August 13, 2011, 09:03:18 PM

Title: cutting fluid recommendation
Post by: dickda1 on August 13, 2011, 09:03:18 PM

All right, I have cleaned away swarf with a brush, dripped cutting oil on with a dropper (even an automated dropper) and used a mist system to deliver cutting fluid on my lathe. and mill.

I have always avoided soluble cutting fluids because I have heard that they cause corrosion or gummy build up eventually.

Any recommendations - particularly for coolant action on carbide tooling?

-Dick

Title: Re: cutting fluid recommendation
Post by: DaveH on August 13, 2011, 09:14:58 PM

Hi Dick,
Have a quick read may help.
http://madmodder.net/index.php?topic=4861.msg54037#msg54037
DaveH

Title: Re: cutting fluid recommendation
Post by: dickda1 on August 13, 2011, 09:25:03 PM

Dave,

Just what I was looking for.  Surprised I didn't run across this before.

Thanks,

Dick