MadModder

The Shop => Our Shop => Topic started by: ticino on August 13, 2011, 12:10:37 PM

Title: Small Smaller Smallest Shop
Post by: ticino on August 13, 2011, 12:10:37 PM

Hello
 Here are a few pictures of my shop ,as you can see "my projects can't be to big". :clap:
greets ticino
www.geslo.nl

Title: Re: Small Smaller Smallest
Post by: doubleboost on August 13, 2011, 05:13:41 PM

Hi
That is a nice place you have there :clap: :clap:
It is suprising what you can make on small machines :dremel: :dremel: :dremel:
I hope you dont wear those gloves while machining :doh: :doh:
My mate pulled his finger off wearing gloves on a pedestal drill :( :( :(
John

Title: Re: Small Smaller Smallest Shop
Post by: Brass_Machine on August 15, 2011, 03:16:31 PM

Nice machines. Although your shop is small, I think your lathe and mill are bigger than mine!  :beer:

Eric

Title: Re: Small Smaller Smallest Shop
Post by: Troutsqueezer on August 16, 2011, 03:46:58 PM

You have a window with natural light. I'll take that over a basement with no windows. It looks cozy.

Title: Re: Small Smaller Smallest Shop
Post by: mcr on August 16, 2011, 04:24:34 PM

Only 12"X4" a one man space!

Title: Re: Small Smaller Smallest Shop
Post by: DMIOM on August 16, 2011, 04:45:05 PM

Quote from: mcr on August 16, 2011, 04:24:34 PM

Only 12"X4" a one man space!

Did you really mean 12 inches by 4 inches - cos if so, that REALLY would count as a small shop!!!  :bugeye:

Title: Re: Small Smaller Smallest Shop
Post by: mcr on August 16, 2011, 05:01:47 PM

Thats why it always comes out too small!!!

Title: Re: Small Smaller Smallest Shop
Post by: mcr on August 16, 2011, 05:03:26 PM

Measure twice post once!!!