MadModder

The Breakroom => The Water Cooler => Topic started by: krv3000 on June 15, 2011, 03:53:01 AM

Title: wat to do next
Post by: krv3000 on June 15, 2011, 03:53:01 AM
HI all well im at a bit of a delemer i dont no wat to mack next im limeted at wat i can do with out a mill i fancy making a 4 strok  aney sugestyons
Title: Re: wat to do next
Post by: Bogstandard on June 15, 2011, 05:00:11 AM
Try making a finger engine.

John
Title: Re: wat to do next
Post by: Stumpy on June 15, 2011, 02:51:02 PM
What about the 15cc nemit no castings the plans come with a jig for doing the cam in the lathe.  A good mate of mine did one on a 7x4 lathe in about 9 weeks ?
Title: Re: wat to do next
Post by: krv3000 on June 16, 2011, 03:04:27 AM
HI stumpy have you got any pics of that engine  and wher did your frend get the plans from regards bob
Title: Re: wat to do next
Post by: Bogstandard on June 16, 2011, 09:14:48 AM
Bob,

Please read your PM's


John