MadModder

The Shop => Tools => Topic started by: DaveH on June 06, 2011, 02:19:28 PM

Title: Roughing End Mills
Post by: DaveH on June 06, 2011, 02:19:28 PM
Hi,

The roughing end mills from Richontools  are they Coarse or Fine, does not seem to say on their web site.

As anyone purchased any?


DaveH
Title: Re: Roughing End Mills
Post by: j45on on June 06, 2011, 03:29:41 PM
I have one but not used it yet, does this pic help ?

(http://i602.photobucket.com/albums/tt102/ja2onx/92eed72c.jpg)

Sorry it's upside down
Title: Re: Roughing End Mills
Post by: DaveH on June 06, 2011, 04:51:40 PM
Jason,

Thank you - but is it a fine or coarse. :thumbup:

Because even from your photo I'm not sure.

And I don't have any to compare :(

 :beer:
DaveH
Title: Re: Roughing End Mills
Post by: j45on on June 06, 2011, 06:42:58 PM
Jason, but is it a fine or coarse

Sorry I don't know it's the only one I have
Title: Re: Roughing End Mills
Post by: DaveH on June 06, 2011, 07:26:44 PM
Jason,

I appreciate your effort :thumbup:

Thanks

Hopefully someone will know

DaveH
Title: Re: Roughing End Mills
Post by: Jonny on June 06, 2011, 07:55:36 PM
Looks course to me or maybe medium if there is such a thing.

On that diameter i have some premium brand names with course similar if not courser. Also some fine that look like a 1 to 1.25mm pitch tap.
Title: Re: Roughing End Mills
Post by: DaveH on June 06, 2011, 08:20:32 PM
Jonny,

So you are going with coarse. They do look coarse to me but not having any to judge makes it a bit of  a guess.

Thanks Jonny :thumbup:

 :beer:

DaveH