MadModder

The Shop => Tools => Topic started by: sawz5 on April 10, 2011, 05:41:48 PM

Title: power feed for milling machine
Post by: sawz5 on April 10, 2011, 05:41:48 PM

 i am going to buy a power feed, what i don't know is if i should buy 135in./lbs. or 150in/lbs torque unit. any ideas or horror stories?

Title: Re: power feed for milling machine
Post by: No1_sonuk on April 13, 2011, 02:00:38 PM

What machine is it for?