MadModder

The Shop => Tools => Topic started by: bp on November 09, 2010, 04:00:30 PM

Title: Centring Microscope--next project??
Post by: bp on November 09, 2010, 04:00:30 PM

I've almost finished my new QCTP project....hopefully I'll be able to post some pictures here to amuse you all.  So the Next Project requires selecting, well actually next but one, the next will be to upgrade my C2 lathes gibs to taper gibs a la Bogs.  So, for the next but one project, a Centring Microscope rather appeals.  If the Hemingway Kits one had an angled eyepiece, I think that I would simply get the kit, but I want an angled eyepiece to ease its use in the mill.  There is the one by Dick Stephens in MEW, but I would prefer a fully enclosed one, to keep the crud out, even if that requires internal illumination.

I would like to produce my own set of drawings....part of the fun......so I'm really looking for ideas I suppose

Does anyone have any thoughts?

cheers

Bill Pudney
Adelaide, Australia

Title: Re: Centring Microscope--next project??
Post by: Gerhard Olivier on November 09, 2010, 05:54:52 PM

some ideas here

http://www.hemingwaykits.com/acatalog/Centering_Microscope.html

Gerhard

Title: Re: Centring Microscope--next project??
Post by: Divided he ad on November 09, 2010, 06:15:56 PM

Cool... I've never seen such a thing!

I've got some bits out of an electron microscope that I erm, salvaged from a skip years ago... A prism, 2 amazing metal polished mirrors one flat one at 45deg and some lenses.... This could be a relatively easy thing to do??


Wow, a project that might get me back into the workshop?    :dremel:



Thank you for the spark guys  :thumbup:




Ralph.

Title: Re: Centring Microscope--next project??
Post by: DICKEYBIRD on November 10, 2010, 01:36:38 PM

Here's one I've been fascinated with but can't seem to find the time to build between "important" projects.  Love to have one!

http://bbs.homeshopmachinist.net/showthread.php?t=27425&highlight=webcam