MadModder

The Shop => Tools => Topic started by: Brass_Machine on January 26, 2010, 05:25:10 PM

Title: X2 Mill peeps take a look at this
Post by: Brass_Machine on January 26, 2010, 05:25:10 PM

(http://littlemachineshop.com/Products/Images/480/480.3677.jpg)

Bolt larger table for the X2. 30% more travel, 50% more table.

LINK HERE (http://littlemachineshop.com/products/product_view.php?ProductID=3677&category=-269978449)

Title: Re: X2 Mill peeps take a look at this
Post by: ksouers on January 26, 2010, 07:24:46 PM

I like it!

Little on the pricey side, though. Wonder if you can get just the table?


Kevin

Title: Re: X2 Mill peeps take a look at this
Post by: No1_sonuk on January 26, 2010, 07:46:09 PM

I think both axes have a bit more travel than normal.

Title: Re: X2 Mill peeps take a look at this
Post by: Harry Eales on January 27, 2010, 05:38:39 AM

Guys,

If you can get access to a larger mill than the X2 you could make a table a lot cheaper from scratch out of steel. You already have the dimensions take them from your existing X2 table. Add on how many inches you want. Make a longer lead screw (More Difficult) and off you go.   :whip:

Harry

Title: Re: X2 Mill peeps take a look at this
Post by: Brass_Machine on January 27, 2010, 10:43:44 AM

Thats just it, unfortunately I don't have access to a larger mill or I would have made my own :)

Eric