MadModder

Gallery, Projects and General => How do I?? => Topic started by: raynerd on January 18, 2010, 01:04:22 PM

Title: How do I remove a pulley?
Post by: raynerd on January 18, 2010, 01:04:22 PM

I need to remove the pulley from my X2 mill and I don`t have a pully puller. I know for a fact the answer is on this forum as I have been in a similar problem a while ago and someone replied to how I should have removed the pulley. I can`t for the life of me find it via search or remember where it was.

I`d really like to give this a crack tonight so if anyone could post up some advice. The method really must leaver off the shaft or it`ll spoil the motor. I know the method is likely to involve a bolt but can`t think how it will be arranged.

Hope someone can help me out. All the best
Chris

Title: Re: How do I remove a pulley?
Post by: Darren on January 18, 2010, 01:09:19 PM

Was it this Chris?

http://madmodder.net/index.php?topic=1342.msg14801#msg14801

Title: Re: How do I remove a pulley?
Post by: raynerd on January 18, 2010, 02:35:12 PM

What do you mean - what is it?

It looks like a puller to me!

Title: Re: How do I remove a pulley?
Post by: raynerd on January 18, 2010, 02:47:31 PM

http://madmodder.net/index.php?topic=1314.45

Got it - SKIPRAT mentioned it, http://madmodder.net/index.php?topic=1314.45 a "Strongback" :coffee: