MadModder
The Shop => Tools => Topic started by: Shepherduke on December 18, 2009, 02:46:55 PM
-
What lub is needed for non-metallic gears in a mini lathe headstock?
Will silicon grease do the job? Thanks in advance.
-
I have found that it is a wast of time to put any thing on the gears. It's not going to stay there.
I used some on my mini-lathe and the next time I had the head of all of the lub was on the bed and not on the gears.
Richard
-
If they're some kind of plastic I'd sy none at all. It's slippery enough without lube.
Besides there isn't much friction on two spur gears.
Bernd
-
Thanks