MadModder

The Shop => Tools => Topic started by: kvom on October 13, 2009, 07:15:13 PM

Title: Over/Under Reamers
Post by: kvom on October 13, 2009, 07:15:13 PM

The set of reamers that I bought from a guy on PM finally arrived today --- only took him a month to mail them.   :wack:

7 pairs from 1/8 to 1/2 by 16ths: Cleveland, made in USA

(http://www.pbase.com/kvom/image/118269225/medium.jpg)

My current project, the Halo engine, has a number of press/sliding fit holes, so these will come in handy right away.

Title: Re: Over/Under Reamers
Post by: Bernd on October 13, 2009, 09:42:37 PM

Kvom,

What size under are they? .0015? or more?

We used the over size reamers for parts that were going to get heat treated. Seems like the holes shrunk after heat treating.

And it looks like you got more than seven in the box. Looks like two are hidding under the other ones on top.  :)

Bernd

Title: Re: Over/Under Reamers
Post by: kvom on October 14, 2009, 07:16:24 AM

They are all .001" over/under, e.g. .124 and .126.  There are 7 pairs.