MadModder
The Shop => Tools => Topic started by: Stilldrillin on October 04, 2009, 05:54:21 AM
-
I needed a small, quiet, compressor for testing small engines.
Chris, (I think), posted this link, http://www.rdgtools.co.uk/acatalog/COMPRESSORS.html
And I decided, what`ll blow a lot `ll blow a little. So I bought the big one! :thumbup:
(http://i110.photobucket.com/albums/n95/Dayjo/pa010014.jpg)
(http://i110.photobucket.com/albums/n95/Dayjo/pa010009.jpg)
Controlled by a 2 position rocker switch. This gives full blow, or obey regulator.
(http://i110.photobucket.com/albums/n95/Dayjo/pa010013.jpg)
Here it is, doing it`s job, perfectly......
(http://i110.photobucket.com/albums/n95/Dayjo/th_MPEG20004.jpg) (http://s110.photobucket.com/albums/n95/Dayjo/?action=view¤t=MPEG20004.flv)
I`ve drilled 1mm hole through a piece of 1/4" bar to give a gentle blow gun, for brass swarf in collets etc...
Not silent, but I would happily use it indoors. But not when Mrs. D`s watching tv..... :D
Interestingly, 2 or more sellers on Ebay, (incl RDG) all charge £88 + £12 carriage. Buying via website got it here for £87! :thumbup:
David D
-
Nice one David..... :thumbup:
Going by your last comment I'm pleased others are finding this..... :wave:
-
I Enjoyed that David those little mamods were spinning along nicely
A cracking bit of kit
Thanks for showing
Stew
-
Nice setup! Just for fun I picked up one of these the other day https://www.surpluscenter.com/item.asp?UID=2009100410535508&item=4-1586&catname=air (https://www.surpluscenter.com/item.asp?UID=2009100410535508&item=4-1586&catname=air) Probably not good for much else, but works great for little engines! :beer:
Jeff
-
Nice setup! Just for fun I picked up one of these the other day https://www.surpluscenter.com/item.asp?UID=2009100410535508&item=4-1586&catname=air (https://www.surpluscenter.com/item.asp?UID=2009100410535508&item=4-1586&catname=air) Probably not good for much else, but works great for little engines! :beer:
Jeff
Would probably run a small mist cooler... :dremel: