MadModder

The Shop => Tools => Topic started by: kvom on July 24, 2009, 08:13:27 PM

Title: Tubing Bender project
Post by: kvom on July 24, 2009, 08:13:27 PM

I have started to build a tubing bender from plans draw up by George Britnell.  I made the first 4 parts from the scrap bin, but will need to raid the school supply on Monday unless I want to make a bucket of swarf.  Rather than try to mill a round cutter to make the roller and die, I plan to make them on the CNC lathe at school.  The target is to make the piping for my steam engine model.

Title: Re: Tubing Bender project
Post by: Brass_Machine on July 24, 2009, 09:44:17 PM

 :worthless:

Lets see what you have done!

Eric