Text Only | Text with Attachments

MadModder

Gallery, Projects and General => How to's => Topic started by: Dell on October 17, 2026, 01:40:27 PM

Title: Adding lights to a circuit controlling a 997 dc motor
Post by: Dell on October 17, 2026, 01:40:27 PM
I am in the process of adding a motor to the spindle on my vertical slide on my Pultra lathe, have a 24 volt power supply,PWM, 2 heavy duty 24 volt relay?s,DPDT switch for forward/reverse but I also want to add lights to show motor direction, green for normal cutting direction, yellow for reverse but not sure where to wire them, I am using a wiring diagram originally posted by daGrouch any help would be much appreciated.
Dell
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Text Only | Text with Attachments