MadModder
Gallery, Projects and General => How do I?? => Topic started by: Fergus OMore on April 11, 2018, 12:26:53 PM
-
I have several pounds of bronze powder which has not been used since before WW2.
Are there any uses for it other than gilding picture frames etc? I thought of mixing it with epoxy resin as a filler to take up wear.
Comments welcome
Norm
-
Spray metal coating using a special oxy-acetylene torch that entrains the powder into the flame. (I have the torch)
-
Mix it with a little dry-powder flux, and use it as brazing spelter.
Most bronze alloys have a fairly low melting point, so ideal for sweated joints on brass, where you don't want to get things too hot and risk sagging the job.
-
Thank you but this powder was definitely not for melting or spraying. The owner( died 1939 before WW2) was a master in glazing, sign writing and employed 50 staff. I still have some of his coloured bronzes as well as some gold leaf left.
Oddly, he was a sort of relative to the real Alice in Wonderland and John Dobson, the Newcastle architect.
Dobson designed Newcastle Central Railway Station as well.
But thanks
Norm
-
Hi Norm
That makes me feel better about some of the stuff I have lying around that hasn't been used for years.
I'd guess you could mix it with varnish to make metallic paint. If it's been lying around that long without a use you could always weigh it in.
Russell
-
I think that I should go for the original uses and get some rabbits' tails and do up a few 'Old Masters'.
If you know what I mean :lol:
Norm
My late wife recycled the gold fillings from rotten teeth which she had extracted. Of course, she made little ingots but they wouldn't assay. I suppose it was the platinum :dremel:
Norm
-
Clearing out my Portakabin this morning prior to it's re-roofing I came across the Rototec metalising gun that would lay your powder down a treat for shaft or bearing recovery.
(Those prices were at least 12 years ago!)
-
I think that I should go for the original uses and get some rabbits' tails and do up a few 'Old Masters'.
If you know what I mean 
Norm
My late wife recycled the gold fillings from rotten teeth which she had extracted. Of course, she made little ingots but they wouldn't assay. I suppose it was the platinum :dremel:
Norm
I did see a warning somewhere that dental gold would test at 24k using the common acid tests.
Russ
-
The gold alloy was recast many years ago- by my late wife who was a FRCS(Edin) and a Dip.Orth. RCS(Eng)-- amongst a lot of other things like a BA, a Dip.Mus-- and sort of knew an odd thing or two- like playing a Bari sax and a classical clarinet and piano. Not necessarily together , of course.
It was mainly trying to tidy up bits and bobs that she never found time to do---like housework and cooking :coffee:
Yes?
Norm
-
New hobby?
(http://i.pinimg.com/736x/3c/24/c3/3c24c393df8781244d13c97fc95c4b22--statues-living.jpg)
-
Norm, DON’T sneeze in the box again.
-
Thanks, :lol:
Only them that knows their own nose, knows.
or would you have "everything that glisters is not gold'?
Joules, you're a 'Jewel'
I'll get me coat
Norm