MadModder

Gallery, Projects and General => Member Videos => Topic started by: doubleboost on January 26, 2017, 11:29:55 AM

Title: Screw cutting 6 TPI through a macro lens
Post by: doubleboost on January 26, 2017, 11:29:55 AM

https://www.youtube.com/watch?v=rc9Dchxa8aY

Title: Re: Screw cutting 6 TPI through a macro lens
Post by: John Rudd on January 26, 2017, 11:52:21 AM

Great stuff John.... :thumbup:
Did you get the mill sorted? :zap:

Title: Re: Screw cutting 6 TPI through a macro lens
Post by: doubleboost on January 26, 2017, 03:15:35 PM

Changed the run cap it lives again
I want to go the 3 phase inverter rout
Be very handy for tapping
John

Title: Re: Screw cutting 6 TPI through a macro lens
Post by: Biggles on January 28, 2017, 04:09:42 AM

Twastard brill John,     hope your leg is on the mend.  :dremel:
George

Title: Re: Screw cutting 6 TPI through a macro lens
Post by: mexican jon on January 28, 2017, 05:17:40 AM

 :mmr: