MadModder
The Shop => Tools => Topic started by: RobWilson on February 02, 2016, 01:15:57 PM
-
Hi Chaps :wave:
I traded my long suffering 20 odd year old RF25 mill /drill for this wee beastie :) all part of my shop upgrades .
(http://i1066.photobucket.com/albums/u410/RobWilson100/Arboga%20Geared-head%20Drill/P1100838_zpsvzxoq4mb.jpg) (http://s1066.photobucket.com/user/RobWilson100/media/Arboga%20Geared-head%20Drill/P1100838_zpsvzxoq4mb.jpg.html)
Had great fun moving it :ddb: Its an Arboga gear head drill , 8 speed ,4MT power fed quil :dremel: , it has a few whitless marks in the table , nowt I can't fix and a few other dings here and there :dremel:
Just for ref the table is 500mm x 400mm and there is 300mm of deep throat :headbang:
Cheers Rob
-
Looks like a right little powerhouse Rob. Is the power feed quill geared of the spindle drive? If so does it have a clutch?
-
Hi Pete ,
it looks like it is , the feed mech has an auto trip/stop , it also looks like it has a rapid and slow feed will find out more when I fire the thing up :zap: , I just plonked it where it stands Sunday tea time and haven't had a good butchers at it yet .
Rob
-
So Rob, with this new mixer those industrial fruit cake's are a go.
-
So Rob, with this new mixer those industrial fruit cake's are a go.
:thumbup: aye are they Joules :lol:
I may have a wee job for your printing skills , there should be two black plastic levers for gear selection , the ally one is a bodge :palm:
Rob
-
Hi Rob,
A solid lump of machine.
A pity I gave away loads of 4mt drills!
Phil.
-
Hi Phil its always the case lol
I still have a to go back and collect a few 4mt drills and sleeves that I had forgot to stick in the van when picking the machine up .
I nearly got shot of a large unused drill vice a week back that I came across while sorting out the workshop , something I had forgot I had , but thought I better just hang on to it :med:
Rob
-
No worries Rob, we can sort you something out.