MadModder

The Shop => Tools => Topic started by: Andrew Wildman on August 16, 2015, 02:40:39 PM

Title: taylor hobson grinder refurb
Post by: Andrew Wildman on August 16, 2015, 02:40:39 PM

second of my project updates is a refurb of a taylor hobson single lip cutter that was normally fitted to a their pantographs for on line sharpening or fitted to a separate stand as a stand alone grinder.  All I had was the cutter grinder body.  I fabricated the stand and motor plate/pulley.

With the drill chuck attachment it could be handy for quick centre punch sharpening or the like, or with some extra accessories made, for sharpening engraving cutters (for when I get engraving on the cnc)

(http://i1031.photobucket.com/albums/y373/dreeewman/taylor%20hobson%20grinder/118.jpg)

(http://i1031.photobucket.com/albums/y373/dreeewman/taylor%20hobson%20grinder/117.jpg)
(sorry shoddy photo)

Title: Re: taylor hobson grinder refurb
Post by: polecat on August 27, 2015, 06:16:23 AM

hi andrew used one of these years ago when i was learning to be an engraver where the bolt goes through the v block you used a holder that you twisted to sharpen your cutter look at pantograph services catologue on the net all will be explained and parts / holders and cutters are for sale at reasonable prices good company to deal with
polecat