MadModder

The Shop => Tools => Topic started by: sbwhart on March 26, 2015, 12:00:36 PM

Title: Parting Off Tool Made From 1/64" Slitting Saw
Post by: sbwhart on March 26, 2015, 12:00:36 PM

I though I'd do a video of the parting tool I made to make some spacers for the tiny Engine I just finished off. I had trouble parting off with my normal 1/16" parting tool it just bent the thin bar so I made this tool it's not my Original idea I saw it some ware can't remember ware.

Stew

     

Title: Re: Parting Off Tool Made From 1/64" Slitting Saw
Post by: John Rudd on March 26, 2015, 12:14:18 PM

Stew,
Nice idea.... :thumbup:
Is  there something supporting the stock at the tail end?
Looks like there's something in the chuck?

Title: Re: Parting Off Tool Made From 1/64" Slitting Saw
Post by: sbwhart on March 26, 2015, 12:21:10 PM

Hi John

Its just a bit of wire to catch the spacers, there that small they just lose them self s in the tray.

Stew