MadModder
Gallery, Projects and General => Project Logs => Topic started by: modeldozer on January 12, 2015, 09:03:56 AM
-
Hi fellow modders,
While my milling machine is still out of commission I thought to make a start on a long outstanding project. Around 30 years ago I bought and built a Tamiya HiLux 4x4 RC model, but other things got in the way and it has been standing on a shelf since.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Tamiya-Toyota-4x4-Pick-Up.jpg)
Have decided to rebuild it completely, cleaning, re-lubricating and repainting. Also opted to replace all the brass bushes in the drive train with ball bearings.
Axles striped down and cleaned.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00001.jpg)
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00002.jpg)
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00003.jpg)
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00004.jpg)
Bearings fitted.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00005.jpg)
Reassembled.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00006.jpg)
And refitted to the chassis.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00007.jpg)
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00008.jpg)
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00009.jpg)
Cheers
Abraham
-
Wow, that's pretty cool -- I've only been in the airplane side of the hobby. Didn't realize the metal and detail of the truck side of things. :thumbup: :clap:
-
Hi Steve,
These can get quite detailed and complicated. Found this old promotional video for this model.
Abraham
-
Good to see you working on RC models I used to do some modding on them for Rock crawling, are you going into the gearbox to change the bearing? somewhere I have some images inside the box.
I also made a transfer box for an 8 wheeler.
Phill
-
Hi Phill,
Thanks. Found a rebuild manual for the gearbox on the internet and will go for bearing convertion.
Abraham
-
Hi all.
One of the shafts in the gearbox had to be pressed apart. After fitting the bearings the pinion was cross drilled and pined to the shaft.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00010.jpg)
All ready for assembly.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00011.jpg)
And assembled.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00012.jpg)
The shock absorbers were also rebuilt with new seals and oil.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00013.jpg)
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00014.jpg)
All mounted back on the chassis.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00015.jpg)
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00016.jpg)
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00017.jpg)
Till later.
Abraham
-
Managed to get a bit more done.
Some of the servo mounts were broken so new ones were made from square MS bar.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00019.jpg)
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00018.jpg)
The original speed controller was giving problems and was replaced with a modern electronic one.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00039.jpg)
Made some caps to blank off the unused servo pivot hole.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00033.jpg)
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00034.jpg)
Also made a support for the new switch, which is quite a bit smaller than the original.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00035.jpg)
Servos, ESC and receiver fitted.
(http://i519.photobucket.com/albums/u356/dozerd10/Workshop/Projects/HiLux/Image00037.jpg)
Cheers
Abraham
-
Looking good
-
:coffee: :coffee: