MadModder
Gallery, Projects and General => How do I?? => Topic started by: DarrenUK on December 24, 2014, 05:15:07 AM
-
Hope someone can help me out, i am looking for an M10 x 1 left hand thread bolt (any length), i only need one and after searching the internet cannot find them available in the UK. Anyone have one spare? or know of where i could buy one?
Thanks
Darren
-
Try evil bay
http://www.ebay.co.uk/itm/like/251275439910?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&chn=ps&device=t&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0
http://www.ebay.co.uk/itm/M10-x-1-5-mm-Half-Nuts-left-hand-thread-pack-of-10-pieces-/380861099350?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item58ad172d56
Not a bolt but threaded rod and nuts
Stuart
S
-
Try evil bay
http://www.ebay.co.uk/itm/like/251275439910?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&chn=ps&device=t&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0
http://www.ebay.co.uk/itm/M10-x-1-5-mm-Half-Nuts-left-hand-thread-pack-of-10-pieces-/380861099350?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item58ad172d56
Not a bolt but threaded rod and nuts
Stuart
S
Thanks but the rod and nuts there are M10 x 1.5mm, I am in need of M10 x 1mm
Darren
-
Personally, I cant think of a better reason to learn to cut threads on the lathe..... :beer:
-
Personally, I cant think of a better reason to learn to cut threads on the lathe..... :beer:
I'd love to but unfortunately I only have a milling machine (SX3) I do not own a lathe yet.
Darren
-
Any fellow hobbyists in your area?
-
It's ok now, someone on another forum has kindly offered to make what I need.
-
There you go! :thumbup: