MadModder

The Shop => Tools => Topic started by: Meldonmech on August 22, 2014, 05:53:05 AM

Title: Tap Wrench Tip
Post by: Meldonmech on August 22, 2014, 05:53:05 AM

 
    Hi Guys

                    When I come to tap small holes requiring delicate torque, I use a combination clock key as a tap wrench.  The key I   use is for no. 2- 4- 6- 8- 10  clock winder squares.  This fits no. 6BA to 0 BA taps.

                                                                    Cheers David

Title: Re: Tap Wrench Tip
Post by: Stilldrillin on August 22, 2014, 07:38:16 AM

Nice idea, David!  :clap: :clap:

Not too expensive, either......  :thumbup:

 http://www.ebay.co.uk/itm/Clock-Winding-Key-Brass-Even-Sizes-Star-Spider-Bench-4-6-8-10-12-Winder-5-Prong-/281157808810?pt=UK_Clocks&hash=item41764fb2aa

David D

Title: Re: Tap Wrench Tip
Post by: Meldonmech on August 23, 2014, 10:35:29 AM

 
    David I found a key under 'Clock Spider Key Brass' on eBay, sizes 2,4,6,8,10 for £ 2 . 90 post free from  redroosteruk.

                                                      Very Reasonable

                                                                                 Cheers  David

Title: Re: Tap Wrench Tip
Post by: Stilldrillin on August 23, 2014, 05:13:00 PM

Very reasonable, David!  :thumbup:

David D