MadModder
Home Base => Announcements & Issues => Topic started by: sbwhart on September 01, 2009, 01:36:56 PM
-
I thought I'd show this to you chaps in the UK you may be interested as this is a good chance to pick up some cut priced tooling.
(http://i431.photobucket.com/albums/qq32/sbwhart/Assembly%20Cylinders%20and%20valve%20link/scan0001-1.jpg)
Have fun
Stew
-
Wrong Right link Stew, :thumbup: :thumbup:
I got the leaflet, at least delivery wouldn't be an issue.....just be careful about any promises for any back-orders if they run out on the day :lol:
-
Wrong Right link Stew, :thumbup: :thumbup:
Whoops corrected it.
Stew
-
Hi Stew,
If you do go, make it early. They come from miles away, last time we went, we turned up about 15 mins before opening time and had to park about 1/4 mile away, and you couldn't move inside, it's only a small place. Full of pokers and prodders and um and ah'ers.
Bogs
-
Hehe.... It's only a few miles from me, bout 10 min's max to get there..... Not sure if I'll make the effort :scratch: :)
I went there the year I got my lathe..... Late on the second day, there were still about 100 funny looking blokes in there nudging their way to the front to get a look in.... Thinking about it ,I was one of them! :lol:
I got my mill vise and some small tooling..... Still cost me, but was definitely cheaper than on the website!
Ralph.
-
I might be up that way next week, is it worth making a detour?
-
Hi 28ten
If you're in the market for some machinery and kit its well worth it they quite often have some good bargans, you'll also get a chance to eye ball there machinery, you never know you might fall in love with a lathe or a mill.
Have fun
Syew
-
Think I'll go Thursday ::)
John S.
-
its bad enough when you go looking for something specific!
bound to be some bargains and its always good to see whats about