MadModder

Home Base => Introductions => Topic started by: micktoon on July 08, 2012, 05:57:37 AM

Title: Good morning and hello from Newcastle
Post by: micktoon on July 08, 2012, 05:57:37 AM

 Hi my name is Mick I live in Newcastle upon Tyne and have been enjoying and learning from the site for a while now as well as enjoying the banter  :clap: I like all things metal and am still very much learning my way with machining, just self taught from needing to make things fit when messing about with cars. I am cleaning up my Harrison L5 lathe and will attempt to post pictures as I go. I am new to this posting business and not too hot on the old computer so bare with me !
 Cheers Mick.

Title: Re: Good morning and hello from Newcastle
Post by: Rob.Wilson on July 08, 2012, 06:18:12 AM

Hi and Welcome  :wave: Mick

Always GOOD to have another Geordie on board, some may disagree LOL , shout up if you get stuck  :thumbup:




Rob   

Title: Re: Good morning and hello from Newcastle
Post by: buffalow bill on July 08, 2012, 06:29:53 AM

Welcome Mick jump in and have fun.  :beer:
Bill

Title: Re: Good morning and hello from Newcastle
Post by: micktoon on July 08, 2012, 08:33:52 AM

 Thanks Rob and Bill , as you say Rob .... the more Geordies the better lol :) and thanks for the offer if I get stuck too. Having been watching the forum for a while now I know how good/superb all the stuff you do is so know any advice will be good advice...... if I can get things done to half as good as you do, I will be well chuffed :thumbup:
  Cheers Mick

Title: Re: Good morning and hello from Newcastle
Post by: spuddevans on July 08, 2012, 09:01:43 AM

Hi there Mick :wave: welcome to the club :mmr:


Tim

Title: Re: Good morning and hello from Newcastle
Post by: doubleboost on July 08, 2012, 10:22:51 AM

Hi
Mick
Welcome to Madmodder
The more Geordies the better :beer: :beer: :beer:
(we will outnumber the Americans at this rate) :lol: :lol: :lol: :lol:
John

Title: Re: Good morning and hello from Newcastle
Post by: Brass_Machine on July 08, 2012, 11:04:50 AM

Hi Mick!  :wave:

Welcome to the collective :borg:

Eric

Title: Re: Good morning and hello from Newcastle
Post by: DaveH on July 08, 2012, 12:50:06 PM

Hi Mick  :wave:

Hello and welcome to MadModder  :clap:
Now if you had been a David from Newcastle that would have been much better  :lol:

 :beer:
DaveH

Title: Re: Good morning and hello from Newcastle
Post by: micktoon on July 09, 2012, 03:00:59 AM

 Thanks for the welcome everyone :clap: :clap: I have been watching other peoples projects for quite a while so hope to put something back in so to speak, my projects at first will be renovating machines to get them into working condition as its all old gear I have. Its a bit catch 22 at first as you need the stuff to make other stuff to fix stuff  :doh: , not to mention making tooling , jigs etc etc etc :scratch:
  There seems to be a few Geordies here so felt I had to keep the numbers going in the right direction  :D

 Cheers  :beer: Mick.

Title: Re: Good morning and hello from Newcastle
Post by: krv3000 on July 09, 2012, 04:12:00 AM

hi jump in and have fun

Title: Re: Good morning and hello from Newcastle
Post by: micktoon on July 11, 2012, 05:07:36 AM

 Thanks Krv3000, I have enjoyrd your posts in the past so hope you will like viewing mine too , seems like good crack on Madmodders in general  :D

Mick