MadModder
The Craftmans Shop => New from Old => Topic started by: mattinker on May 14, 2020, 01:12:21 PM
-
This video is about making a new stem and ring for a nineteenth century lock. I braze the steel parts with brass braze and I use silver solder to braze the brass "bit" to the steel tenon. This makes it easier as the melting point of the silver solder is lower.
-
Very interesting Iv'e always had a fascination with old locks! I have to say though I was yelling for a while about the catching of that piece! :beer:
-
Thanks Tom,
Well, I did get the sticking sorted in the end, my first lock of this kind!
-
That's two of us then, Tom :D
-
That's two of us then, Tom :D
Thanks for the reply! ;--)