MadModder
Home Base => Introductions => Topic started by: lesul on September 20, 2009, 10:34:56 PM
-
Hi, I am a hobbyst from Brazil. In professsional area I'm a electronic technician, but I love see the chips flying around my little shop...I'm learning only reading forums like this. My actual stage of expertice is below 0, but I can contribute with my errors and trials...hehe. No pics of actual stage of the "dirty shop", but the begining can be seen in www.oficinademetal.blogspot.com (only in portuguese).
P.S. Please correct me if I killing the english language....
-
Hi Lesul :wave:
Welcome to MadModder. Every one else on this forum started a 0 or below as well and have progressed to different levels. We all try to help each other and have a good time. I am sure that your english will do just fine, it certainly is a lot better than my Portugueese. I had a look at the link and it looks like you have a good start on your shop with a mill, lathe and horizontal bandsaw. We look forward to seeing some of the projects as they take shape in your shop.
One thing we always say on this forum is that :worthless:
Enjoy your stay. :D :D
Cheers :beer:
Don
-
Hello and welcome to our little forum :wave:
Tim
-
Welcome aboard the cube Lesul :borg:
Looks like you've got some nice kit in your workshop :thumbup:
Don't wory about killing English the chaps up in north America have already done a good job on that
:lol: :lol: :lol: :lol:
Have you got any particular area of interest or do you just like messing with machines ?.
What ever your interest there plenty for every one on her watch out for :proj:
every one gets it. Ask questions as we like to help people
Have fun
Stew
-
Welcome Lesul :wave:
Get stuck in! Enjoy! :D
David D
-
Hi Lesul,
Welcome to the collective. :borg:
Not to worry about your English. What ever you say will get through.
By the way, I believe you are the first from Brazil. We should have a prize or something for you, but we don't except for friendship. So join in the fun and catch :proj:
That shop looks to clean to have had chips flying around. :lol:
Regards,
Bernd
-
Don't wory about killing English the chaps up in north America have already done a good job on that
Hmm, misspelled word, no punctuation, improper capitalization and run-on sentence in one line of text. It seems that the Brits are doing a good job on that themselves.
-
Don't wory about killing English the chaps up in north America have already done a good job on that
Hmm, misspelled word, no punctuation, improper capitalization and run-on sentence in one line of text. It seems that the Brits are doing a good job on that themselves.
:lol: :lol: :lol: :lol: :lol:
Nice one
-
Now now, girls, you know we have a no language bashing policy policy on this site.... :poke:
Only cos most of us are illiterate......I blame the Americans, watering us down they are..... :lol:
-
Welcome to the
warduhh, collective Lesul, I checked your link and it appears that you have a good start in acquiring the tooling to support participating in our addiction. As your skills and abilities improve your desire to have more and bigger equipment will increase and you will never have a large enough space. There is no dumb question except the one you don't ask. :poke: As stated above your English is way better than my Portuguese. Now go makes some chips and post :worthless:
For those of us using Google, the translate function on the toolbar makes us bilingual. I tried it and "translate" works. I can read Portuguese!!!!
Cliff :coffee:
-
lesul Take no notice of the comedy factor, your English is far better than
a lot most on here ::) :clap: so just join in
Good to have you on board, and just enjoy the light hearted banter :lol:
CC
-
Guys , thanks for your reception...I'm glad (or not?) to be the 1st brazilian guy for here...hehe. This is the first forum than I post, and don't read only. My projects?? Only 2 for now... 1 angle plate from Mr Ishimura site e 1 broken gear of my mill! Of course, there are minor projects, like broke end mills, etc...I broke the gear of the mill using a fly cutter and a less patience than I should be...But, whit this, I now have a serious project I will post soon: Convert my mill to belt with homemade pulleys...
-
Hiya Lesul!
Welcome to the collective :borg: glad to see you posting. Don't worry about butchering the English language, we will make do and try to understand. Its all become mishmashed anyway... what we speak here in the U.S. is not quite the same as the U.K. or Australia or NZ etc.... much like Spanish, dialects etc... different in Mexico to Spain...
Either way we will try to understand.
Lets see some pictures of those projects!
Eric