MadModder

The Breakroom => The Water Cooler => Topic started by: krv3000 on April 05, 2013, 07:40:23 PM

Title: help drumond rawnd bed model a i think
Post by: krv3000 on April 05, 2013, 07:40:23 PM

hi can any one tell me the pich and size of the thred on the spindel  ie the bit the chuck gos on to

Title: Re: help drumond rawnd bed model a i think
Post by: lordedmond on April 06, 2013, 03:29:54 AM

Its a long time ago since I had one of those mine was on its treadle stand ( by was motored )


as to you question  if my single grey cell is Ok its 7/8 whit


there is plenty of info here http://www.lathes.co.uk/drummondroundbed/

Tony comments on the spindle size about halfway down the second lump of text

Stuart

Title: Re: help drumond rawnd bed model a i think
Post by: chipenter on April 06, 2013, 04:14:27 PM

The thread on mine is 3\4 whitworth with a 25\32 register ,

Title: Re: help drumond rawnd bed model a i think
Post by: krv3000 on April 06, 2013, 05:06:18 PM

thanks all for the help