MadModder

The Shop => Our Shop => Topic started by: PeterE on June 24, 2011, 06:33:11 PM

Title: PeterE's Fixall Corner
Post by: PeterE on June 24, 2011, 06:33:11 PM

Hi,

I was asked to show a picture or two from my "Mini Workshop" or the "fixall" corner in the garage.

It is basically two benches in a corner about 60 cm (2ft) deep and together they are about 5 m (15 ft) long. The first leg includes the bench drill-press and the hand tool workspace:
(http://i577.photobucket.com/albums/ss219/H0n3/Tooling/Verkstan-02.jpg)

The second leg harbours the C3 lathe and the Super X1L mill:
(http://i577.photobucket.com/albums/ss219/H0n3/Tooling/Verkstan-03.jpg)

In addition to this I made a rolling cabinet of wood for the micro-lathe and its accessories, and on top a smallish toolmakers cabinet with a few drawers primarily for measuring and threading tools:
(http://i577.photobucket.com/albums/ss219/H0n3/Tooling/Svarvskp-02.jpg)

(http://i577.photobucket.com/albums/ss219/H0n3/Tooling/Svarvskp-03.jpg)

Not much but quite useful I think.

BR

/Peter

Title: Re: PeterE's Fixall Corner
Post by: doubleboost on June 25, 2011, 06:56:15 PM

Very nice
I like your micro lathe cabinet
John

Title: Re: PeterE's Fixall Corner
Post by: PeterE on June 26, 2011, 06:57:09 AM

Thank you John, even though being a wood project it was quite fun to do it and provided me with good storage for the little lathe.

BR

/Peter