MadModder

The Craftmans Shop => Backyard Ballistics => Topic started by: Powder Keg on November 17, 2008, 08:50:56 PM

Title: Six pack
Post by: Powder Keg on November 17, 2008, 08:50:56 PM
Here is a quick picture of another project. I got a chance to play on the CNC at work;o)

(http://img.photobucket.com/albums/v652/Powderkeg3418/SixPack004-1.jpg)

Wes
Title: Re: Six pack
Post by: Brass_Machine on November 17, 2008, 08:54:04 PM
Oooooh sweet!

Size? Deck Guns?

Eric
Title: Re: Six pack
Post by: Powder Keg on November 17, 2008, 09:07:03 PM
Forgot about that... They are 26" long and have a 1.5" bore. Here is a picture of my drilling setup.

(http://img.photobucket.com/albums/v652/Powderkeg3418/Tropicossixpack002.jpg)

Wes

Title: Re: Six pack
Post by: Powder Keg on November 29, 2008, 11:53:32 PM
Got some more done on these :worthless:

Here is one of my barrels set up on the CNC mill I run at work.
(http://img.photobucket.com/albums/v652/Powderkeg3418/tropicossix005.jpg)

I machined pockets into the sides for the trunnions to screw into.
(http://img.photobucket.com/albums/v652/Powderkeg3418/tropicossix006.jpg)

Here is a finished pocket. It was milled on the CNC with a 1.5" endmill.
(http://img.photobucket.com/albums/v652/Powderkeg3418/tropicossix007.jpg)

This old mill is kind of a "bull in a china store" when it comes to threading. Better do this buy hand;o)
(http://img.photobucket.com/albums/v652/Powderkeg3418/tropicossix008.jpg)

More to come...

Wes