MadModder
Gallery, Projects and General => How to's => Topic started by: DaveH on June 25, 2013, 07:27:54 PM
-
Hi,
If you have ever wondered how to a wind a coil spring here is a link that will show you how to.
http://www.metalworkingfun.com/showthread.php?tid=1441 (http://www.metalworkingfun.com/showthread.php?tid=1441)
Never know it could be useful. :) I thought it was worth sharing.
:beer:
DaveH
-
Hi Dave
Great video
Thanks
-
Nice find Dave but must point out that's only using spring or music wire ready hardened and tempered.
Same principle using proper steels then hardening after for more demanding applications.
To create a compression spring with known pitch just set power feed or screwcut pitch to suit, hopefully the pitch may stay the same.
-
Hi Dave,
Thanks for showing the video, I have made springs on a lathe before, but only using hand power. The use of the vee tool, and using screw cutting feeds is very interesting and will try this method when I next need a spring.
Cheers David