MadModder
Home Base => Introductions => Topic started by: terkng on August 24, 2011, 12:05:39 PM
-
Hi everyone,
Just got myself started in this new hobby :beer: I am saving up to get a cnc Sherline mill and lathe in the near future. I hope to share and interact with all of you as I take baby steps forward.
:)
Cheers to everyone!
Regards,
tk
-
Hiya TK :wave:
Welcome to the collective :Borg:
Where do your interests lie? What do you want to make when you get your machines?
Eric
-
Hi Eric,
Thanks for the assimilation!
I am planning to make some simple toys for my kids and myself to play with. I am hoping to gradually get them more involved in making stuff with their hands, feet and head (in addition to the keyboard and mouse). I am looking around at some starter projects using wood and later moving on to plastics and metals.
Cheers,
tk
-
Tk, :wave:
Hello and welcome to MadModder.
I have Sherline cnc mill and a manual sherline lathe. Really are smashing little machines. :D
feel free to join in. :D
:beer:
DaveH
-
Hi there TK :wave: welcome to madmodders, :mmr:
Tim
-
Welcome to us :wave:
-
Hi TK and Welcome to the nuthouse, ooops, madmodders!!!
from one nudie to another , http://madmodder.net/Smileys/default/anim_32.gif ,
Bill
-
Hi TK, and welcome. You aren't the only Singaporean on here.
And starting with CNC machines - you must be a youngster!
Andy
PS
.... from one nudie to another...
Is that a reference to what you don't wear under your kilt, Bill? :)
-
Hi TK.
Welcome to the Collective! :borg:
Hope your hobby develops, as you hope it will.... :thumbup:
Don't forget to share with us, with pics! :D
David D
-
Hi TK,
lived in Singapore in the 70's just off Orchard Road on Jalan Lada Puteh. What you planning on making with your new cnc setup ?
Joules
-
Hello TK,
I'm the other Singaporean here. I can see that you're rather "busy" after getting your machines 2 days ago. Have you started your first cut?
This forum is cool with lots of good folks who are willing to jump in and provide you with their advice.
:nrocks:
I'm just a phone call away if you need help setting up but you must bear in mind that I'm still struggling along.
Regards,
Wong